Strategy1
Making a Scorching Glue Cell Phone Scenario
-
Tape a template to the again of your cell phone, if ideal. Making a sleek scenario is complicated with sizzling glue, so most men and women pick out to do patterns, this sort of as swirls or mandalas. The Web end can cost-free-hand the pattern, or you can trace it. If you want to trace it, do the following:
- Trace your cell phone onto a sheet of paper.
- Attract your sample utilizing a black marker. Make sure the style touches the sides.
- Cut out the template together the outline.
- Tape the template to the back of your telephone.
    -
Wrap your telephone like a present with parchment paper. Cut a sheet of parchment paper that’s about 2 times the dimensions of your mobile phone. Location your cellular phone on prime, with the display facing up. Wrap the paper around the aspect edges of your cell phone, then secure them with a piece of tape. Wrap the top and base edges, and protected them with tape as properly.
- Wrap your cellular phone as tightly as you can.
- Make confident that the cellphone is turned off initially to reduce overheating.
- Make absolutely sure that you are taping all the things on the front of the cellphone.
 
  -
Mark off the digicam, sockets, and buttons with a pen or coloured pencil. These will be your pointers so that you will not accidentally address them with warm glue.
- Make guaranteed that the shade you use shows up from your mobile phone.
   -
Outline the sockets, buttons, and camera. This also consists of the speaker and mic holes as effectively. If you go over them up, you will not be able to use your phone adequately.  
-
Fill in the facet edges. Make sure that you make them great and thick. Also, make absolutely sure that you keep away from the buttons and sockets.  
-
Fill in the back. Again, sizzling glue is not the most effective medium to build a completely clean situation, so your best bet is to make a texture of pattern. Whichever you pick out, make confident that all the lines link to the sides of the mobile phone as well as to just about every other.  
-
Outline the entrance. You can simply attract a thin line around the entrance of the cellphone, suitable following to the facet edge. You can also make a collection of tiny dots as an alternative. This will give your circumstance a lip and assistance it remain on your cellular phone.  
-
Eliminate the scenario and the parchment paper. Once the glue has hardened, peel it off of your cellular phone. Take away the parchment paper from the mobile phone next. At this issue, it would be a superior notion to exam the case on the mobile phone. If there is any glue covering a button, socket, and so on., then you can slash it absent with a craft blade.  
-
Paint the case, if wanted. Once you are happy with the circumstance, choose it off of the phone. Paint the exterior with nail polish, then permit the polish dry. If you want the scenario to be a reliable color, you can use spray paint rather.  
 
 
Approach2
Generating a Silicone Cell Cell phone Circumstance
-
Set on plastic gloves and safeguard your do the job surface area. Cover your counter with plastic wrap, parchment paper, or wax paper. You can also do the job on leading of a marble counter or a glass sheet rather.
- Test to do the job in a properly-ventilated spot. Silicone can have a robust odor.
- The silicone utilized in this strategy is not the very same as scorching glue.
   -
Measure out your cornstarch and clear silicone. Pour some cornstarch on to a smooth counter or into a glass bowl, then squeeze some distinct silicone on to it. The measurements do not have to be exact you just want to have more cornstarch than silicone. Plan on utilizing about 5 tablespoons (50 grams) of cornstarch and two to 3 tablespoons (30 to 40 grams) of silicone.
- Make certain that you are utilizing apparent silicone. You can locate it in residence enhancement suppliers. It comes in a syringe.
- If you are unable to locate cornstarch, search for cornflour. You can also use potato starch as an alternative.
   - Make certain that you are utilizing apparent silicone. You can locate it in residence enhancement suppliers. It comes in a syringe.
-
Think about introducing some colour. You will not have to do this, but it a fantastic way to make your telephone situation glance extra interesting. If you really don’t do this, your cell phone circumstance will glimpse white. You use a several drops of liquid dye, liquid watercolor, food items coloring, or acrylic paint.  
-
Knead everything alongside one another until the silicone turns to dough. You will need to knead it about 20 periods or so. You would not choose up all of the cornstarch, which is typical. The dough might appear crumbly at very first–just preserve kneading!  
-
Roll the dough into a flat sheet. You can do this with a rolling pin, a glass, a wine bottle, or even a spray paint can. Hold rolling right until you have a sheet a minimal more substantial than your cellular phone. The Web end must be about ⅛ inch (.32 centimeter) thick.  
-
Spot your cellphone on top of the sheet. Make absolutely sure that your screen is going through upwards, and you have equal amounts (or near to it) of dough sticking out in excess of every aspect.  
-
Wrap the dough in excess of the sides and prime of your phone. Slide a paint spatula underneath the dough, then carry it up and fold the dough in excess of the sides of the mobile phone. Smooth out any creases or wrinkles try to be as neat as probable.  
-
Use stamps to indent types, if wanted. Flip your cellphone over and dust it with cornstarch. Use a stamp to indent styles into it. You can also use cardboard cutouts in its place to build your individual, unique styles. Lift the stamp away when you are performed.
- If you want to make a quilted style and design, enable the silicone harden for about 10 to 20 minutes, then dust it with cornstarch. Use a knife to make cross-crossing diagonal lines in a diamond/quilted pattern.
   - If you want to make a quilted style and design, enable the silicone harden for about 10 to 20 minutes, then dust it with cornstarch. Use a knife to make cross-crossing diagonal lines in a diamond/quilted pattern.
-
Let the silicone dry before getting rid of it. How lengthy this normally takes depends on the kind of silicone you used and the climate problem. It may perhaps get just two hrs, or it could consider 24 hours. The moment it is dry and sound to the contact (you are unable to dent it), pull it off of your cellphone.
- If the case is dusty inside of, wipe it down with a moist cloth.
   -
Trim the excessive silicone away from the front. Cut it about 7 millimeters away from the side edges, and one centimeter absent from the top rated and base edges.Alternatively, you can slice alongside the indentations triggered by the seam amongst the phone’s display and circumstance.  
-
Slice out any indentations. If you have been to search inside your mobile cell phone case, you’d see little indents brought about by the camera, flash, buttons, and sockets. Lower all of these out utilizing a sharp craft blade.
- You can also carve a rectangle or trapezoid into the major and/or bottom edge for the speaker as a substitute of slicing out a slot.
   - You can also carve a rectangle or trapezoid into the major and/or bottom edge for the speaker as a substitute of slicing out a slot.
-
Sand the scenario sleek, if sought after. You can use far more uncooked silicone on top if you want to, then sleek it out with a paint spatula or popsicle adhere.  
-
Paint the stamped places with nail polish, if desired. Choose a shade that goes nicely with your situation. Metallic shades, these types of as silver, function especially properly!
- You can make extra styles out of silicone separately, permit them dry, paint them with nail polish, then glue them to the scenario with a drop of clear silicone.
   - You can make extra styles out of silicone separately, permit them dry, paint them with nail polish, then glue them to the scenario with a drop of clear silicone.
 
 
Approachthree
Creating a Felt Cell Cellular phone Situation
-
Reduce a piece of felt in half widthwise. If you want a thicker phone scenario, use two parts of felt rather. They can be the very same shade or contrasting hues.  
-
Cut the pieces ½ inch (1 centimeter) more substantial than your mobile phone. Place your mobile phone on major of the to start with piece of felt. Trace all around it using a ½-inch (1-centimeter) border. Minimize the felt out, then use it as a template for the other piece(s).  
-
Put your cellphone between the two parts of felt. Make confident that all of the edges and corners are aligned. If you are producing a lined scenario, with two distinct colours of felt, choose a person coloration to be on the inside of, and the other color to be on the outside.  
-
Pin the parts of felt all-around your mobile phone. You only will need to pin the bottom and two facet edges go away the prime edge open. Attempt to pin the felt as tightly all-around your mobile phone as you can. The healthy will be cosy at initial, but it will eventually loosen up.  
-
Take out your cell phone and sew along the pinned edges. Use the pins as a information as you sew. Your seam allowance will differ, dependent on the thickness of your telephone. You can do this on a stitching device or by hand.
- If you are performing this by hand, take into account employing embroidery floss in a contrasting shade.
- If you are undertaking this on a stitching machine, backstitch at the start off and close of your stitching.
   -
Trim down your seam allowances. Try to cut as close as you can to the stitching, about ⅛-inch (.3 centimeters). For a far more exclusive look, use pinking shears in its place.